155Maintenance and Inspections: Warning SystemMaintenance and InspectionsThe following error codes are displayed in the display window if an error occurs in the camera:Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 153) for countermeasures.11. P2 Card Nearly FullDisplay windowindicationOne of the bars for remaining MEDIA capacitystarts blinking.WARNING lampBlinks once per second while recordingcontinues.Tally lampBlinks once per second while recordingcontinues.ViewfinderThe P2 card remaining capacity indicator blinks.Warning toneBeeps once per second while recordingcontinues.WarningdescriptionThe total remaining capacity of all the P2cards is two minutes or less.Recording/playbackoperationContinues to operate.CountermeasuresReplace the cards. If there is an empty cardslot, insert a new card.12. P2 Card ErrorDisplay windowindicationDisplays “00:00:00:11” in the time codedisplay. The window continues to flash untilthe next operation, even after stopping recordand playback.WARNING lampIf the error occurs during recording, the lampflashes four times per second for a period ofabout three seconds. The lamp does not lightif the error occurs during playback.Tally lampIf the error occurs during recording, the lampflashes four times per second for a period ofabout three seconds. The lamp does not lightif the error occurs during playback.ViewfinderA flashing “CARD ERR¢” appears. In the actualindication the¢is replaced by the slot number ofthe P2 card that triggered the error.Warning toneIf the error occurs during recording, the tonesounds four times per second for a period ofabout three seconds. The tone does notsound if the error occurs during playback.WarningdescriptionAn error has occurred while recording data toor playing data from a P2 card.Recording/playbackoperationStop recording or playback. After recording isstopped, the P2 card where error occurs iswrite protected.CountermeasuresReplace the affected P2 card.13. FAN STOPDisplay windowindicationNo display.WARNING lampBlinks 4 times per second.Tally lampNo display.ViewfinderThe FAN STOP indicator blinks whilerecording continues.Warning toneIt does not sound.WarningdescriptionThe fan is at rest because something is wrongwith it. Alternatively, the FAN MODE item isset to “OFF”. The menu item FAN MODE isfound in the OPTION MENU page.Recording/playbackoperationIf the camera-recorder operates with the fanstopped, then the temperature inside rises.While the camera-recorder continues tooperate, clips may not be recorded or playedback properly.CountermeasuresImmediately stop using the camera-recorderand consult your distributor.Error CodesCode No.DescriptionType of warningsE-11Video initialisation error1. System ErrorsE-27Recording control error1. System ErrorsE-30P2 card removal error2. Card removal errorE-34LCD microcontroller error1. System ErrorsE-38P2 streaming microcontroller error1. System ErrorsE-3FMicroprocessor error in the camera control circuit.1. System ErrorsE-40Image sequence, GENLOCK input signal or SDI input signal error5. Image Sequence Error, 6. Corruption of Standard SignalE-63Something is wrong with the system control microprocessor.1. System ErrorsE-6FReference signal error.1. System Errors00:00:00:11Errors such as recording to P2 card error7. Recording Error, 8. Number of Clips Exceeded,12. P2 Card Error