Panasonic P2HD AJ-HPX3100G Operating Instructions Manual

Also see for AJ-HPX3100G: Manual Operating instructions

Contents

165Menu: Menu Description TablesMenuItems/Data SavedAdjustableRange RemarksONE CLIPREC MODEONOFFSelect the ONE CLIP REC mode.ON: Operate in ONE CLIP REC mode.OFF: Do not operate in ONE CLIP RECmode.NoteThis item cannot be changed in thefollowing cases.z When “ON” or “ONE SHOT” is selectedfor the INTERVAL REC MODE item.z When “ON” is selected for the LOOPREC MODE item.– C U F –OUTPUT SELItems/Data SavedAdjustableRange RemarksOUTPUT ITEM MENU ONLYTCSTATUSSet the character contents superimposedonto the output signals for the SDI OUTconnector and MON OUT connector.MENU ONLY:Displays only when the menucharacters are superimposed. Nodisplay appears when other charactersare superimposed.TC: Display the time code. (Displays themenu when menu characters aresuperimposed.)NoteThe TC display position moves upand down depending on the cameraID position.STATUS:Display the same characterssuperimposed on the viewfindersignal. (Displays the menu when menucharacters are superimposed.)– C U F –SDI OUTMODEMEMCAMSelect the output signal for the SDI OUTconnector.MEM: in playback mode, this is theplayback image.CAM: always the camera image.NoteThis item is effective if “CAM” is set forthe REC SIGNAL item in the MODE> screen. If “SDI”, then in playbackmode, this will be the playback videoregardless of this setting.– C U F –SDI OUTCHAROFFONSelect whether to superimposecharacters on the image output from theSDI OUT connector.OFF: Do not superimpose.ON: Superimpose.NoteThe content of the superimposedcharacters is the same as thatsuperimposed on video output from theMON OUT connector– C U F –MONITOROUTHD (1080i):HD SDISD SDIVBSSD(480i/576i):SD SDIVBSSelect the output signal format for theMON OUT connector.HD SDI:output an HD SDI signal.SD SDI:output an SD SDI signal.VBS: output a composite signal.NoteSettings values for HD and SD are storedseparately.– C U F –Items/Data SavedAdjustableRange RemarksMONITOROUT MODEMEMCAMSelect the output signal for the MON OUTconnector. This operates separately fromSDI OUT.MEM: in playback mode, this is theplayback image.CAM: always the camera image.NoteThis item is effective if “CAM” is set forthe REC SIGNAL item in the MODE> screen. If “SDI”, then in playbackmode, this will be the playback videoregardless of this setting.– C U F –VF/LCD CHAR VF-OFFLCD-OFFONSelect whether to superimposecharacters on the video displayed on theLCD monitor or in the viewfinder.VF-OFF: do not superimpose in theviewfinder, insteadsuperimpose on the LCDmonitor.LCD-OFF: do not superimpose on theLCD monitor, insteadsuperimpose in theviewfinder.ON: superimpose in both theviewfinder, and on the LCDmonitor.– C U F –VF MODE MEMCAMSelect the viewfinder image.MEM: in playback mode, this is theplayback image.CAM: always the camera image.NoteThis item is effective if “CAM” is set forthe REC SIGNAL item in the MODE> screen. If “SDI”, then in playbackmode, this will be the playback videoregardless of this setting.– C U F –THUMBNAILOUTONOFFSelect whether or not to output clipthumbnails displayed on the LCD monitorto the video output and monitor outputsignals.ON: Enable output.OFF: Disable output.NoteHD SDI signals are being output,thumbnails are not output.– C U F –SDI OUT MARKERItems/Data SavedAdjustableRange RemarksMARKER SW OFFONSwitches the marker on and off.OFF: The characters are notsuperimposed.ON: The characters aresuperimposed.– C U F RCENTERMARKOFF1234Switch the center mark.OFF: Do not display center mark.1: + (large)2: Hollow (large)3: + (small)4: Hollow (small)– C U F R