139Connection with external device: Connection with external devices using the USB 2.0 portConnection with external device8. MODELThis section indicates the model of the P2 card thatoriginally contained data on the partition.NotePress the cursor button (!) to switch to the PARTITIONNAME. Press the cursor button (") button to return to theoriginal model name display.9. DATE/TIMEThis section indicates the date and time the data on thepartition was recorded.10.SERIALThis section indicates the serial number of the P2 cardthat originally contained the data on the partition.11.VERIFYThis section indicates the verification setting and resultsat the time the data on the partition was recorded.ON:FINISHED :Verification was performed and the results agreed.ON:FAILED :Verification was performed and the results did notagree.OFF :No verification was performed.- - - :No verification information is available.Notesz Even for a FAT-type hard disk drive, the 1001st or laterclips are not shown.z For a FAT-formatted hard disk drive, the informationabout only the first partition is shown.z For a P2 STORE (AJ-PCS060G) that has an invalidpartition, that partition information is shown in gray.12.NAMEThis section indicates the PARTITION NAME.Enter the PARTITION NAME from the softwarekeyboard by selecting [CHANGE PARTITION NAME] inthe OPERATION MENU while the thumbnail of the harddisk drive is displayed. (Max. 20 characters)1 Switch the mode to USB HOST.> [Switching to the USB HOST mode] (page 137)2 Connect the hard disk drive via USB.3 Press the THUMBNAIL button to display thethumbnail screen.4 Press the THUMBNAIL MENU button andselect HDD > EXPLORE from the thumbnailmenu.The display provides a screen that shows theinformation about the hard disk drive.5 From the menu, select OPERATION >FORMAT (HDD) and select YES using thecursor buttons and SET button. Then, theconfirmation message is displayed again.Select YES.The camera-recorder starts formatting the hard diskdrive. Once formatted, the hard disk drive can betreated as a TYPE-S HDD.Notesz Formatting a hard disk drive erases all contents of it.Note that you cannot erase the contents of certainpartitions by specifying them.z Operation of the hard disk drive with this unit, and thedata in the hard disk drive are not guaranteed if a harddisk drive formatted by this unit is rewritten usinganother PC or similar.z Data erased by formatting cannot be restored, so besure to perform the format after first confirming thedata.Formatting a hard disk drive
