74 Adjustments and Settings for Recording : Setting Time DataBy setting the DISPLAY switch to “CTL”, CTL count isdisplayed on the time count indication of the LCD displaywindow.The CTL count is displayed in ±12 hours with non-drop-frame.The playback order of clips recorded on a P2 card is notlinear as for VTRs. It is organized according to thumbnailoperations or exchanging P2 cards, and the priority ofrecorded clips will be altered. Therefore, different CTLcounts are displayed for recording mode and playbackmode, respectively.Recording CTL count is displayed during recording mode(REC, REC/PAUSE, STOP and REC REVIEW), and thecount continues from the end point of the previousrecording. Recording CTL count is retained even if thepower is turned off. When the power is next turned on, thecount continues from the previous value. Notesz If the RESET button is pressed while the recording CTLcount is being displayed, only the recording CTL count isreset. Note that reset is disabled during the REC REVIEWoperation.z 24 frames are counted in the 24PN (Native) mode.During playback mode (PLAY, FF, REW, PLAY/PAUSE),playback CTL count is displayed.Whenever the playback order of clips is altered (clips aresorted by shooting dates), previous playback CTL count isdisabled. The first frame of the first clip is used as areference value for recalculation, and the new playback CTLcount is displayed.The playback order of clips is altered when either of thefollowing occurs:z Clips are deleted, copied or restored, or the P2 card isformatted.z The thumbnail display is switched (for more information,see [Switching the Thumbnail Display] (page 122)).z A P2 card is inserted or removed.The reference value (value of the first frame of the first clip)is changed when either of the following occurs:z The power is turned on, the first frame becomes 0.z When the playback CTL count is reset, the currentplayback position is set as 0, and the previous referencevalue becomes a negative value. Notesz If the RESET button is pressed while the playback CTLcount is being displayed, only the playback CTL count isreset.z For playback in 24PN (Native) mode, 30 frames arecounted in accordance with the pull-down images.CTL Count Setting and DisplayCTL count for recording mode (recording CTL)CTL count for the playback mode(playback CTL)00:00:00:0000:00:00:0000:01:00:00 00:02:00:00 00:03:00:0000:01:00:00 00:02:00:00Current valueCurrent valueClip 2 Clip 3Clip 1 Clip 3Example:Delete Clip 2.First frameClip 100:00:00:00–00:03:00:0000:01:00:00 00:02:00:00 00:03:00:00–00:02:00:00 –00:01:00:00 00:00:00:00Current valueClip 1 Clip 2 Clip 3Clip 1 Clip 2Example:ResetFirst frameFirst frameClip 3
