54 Adjustments and Settings for Recording : Setting the Electronic ShutterThe shutter speed in any shutter mode is set using theSHUTTER switch.In SYNCHRO SCAN mode, shutter speed can be switchedeasily, using the SYNCHRO SCAN ADJUSTMENT switches(+/–) on the side panel.Note that the range of selectable shutter speeds may be pre-defined; whether or not to use the SYNCHRO SCAN modemay be determined through the and screens.> [CAM OPERATION] (page 181)The selected shutter speed is retained even if the unit isturned off.1 Press the SHUTTER switch, positioned at[ON], towards [SEL].2 Once more, press the SHUTTER switchtowards [SEL]. Repeat this switchover untilthe desired mode or speed appears in theviewfinder screen.If all modes and speeds are available, the displaychanges in the following order:See [Viewfinder Screen Status Displays] (page 75).NoteSHUTTER mode turns off when operating the DS.GAIN.Press the SHUTTER switch positioned at [ON] towards[SEL], to place the camera-recorder in SYNCHRO SCANmode.z In the SYNCHRO SCAN mode, it is possible to change theshutter speed continuously by operating the SYNCHROSCAN (+/–) buttons.z The shutter speed display in synchro scan mode isswitchable between second indication and angleindication.> [SYNCHRO SCAN DISP.] (page 177)Setting the Shutter Mode and Speed# < SHUTTER SPEED >SYNCHRO SCAN :ONPOSITION1 :ONPOSITION2 :ONPOSITION3 :ONPOSITION4 :ONPOSITION5 :ONPOSITION6 :ON# < SHUTTER SELECT >POSITION1 SEL :1/100POSITION2 SEL :1/120POSITION3 SEL :1/250POSITION4 SEL :1/500POSITION5 SEL :1/1000POSITION6 SEL :1/2000Viewfinder displays relating to the shutterSHUTTER switchPOSITION1 POSITION2 POSITION3 POSITION4 POSITION5 POSITION6NORMAL modeSYNCHROSCAN modePlacing the Camera-recorder in SYNCHRO SCAN ModeSHUTTER switchSYNCHRO SCAN ADJUSTMENT buttons (+/–)
