124Disc or Card Management123Verifying Remaining Free Space on Disc or Card (Capacity)You can find out how long you will be able to record on one side of disc or on card.1 Press the DISC NAVIGATION button.2 Press the MENU button.3 Choose “Capacity” on the “Disc” or “Card” menuscreen, and then press the A button.*1With DVD-R disc: The quality mode first used forrecording with disc will appear.*2With DVD-R disc: This will not be displayed.4 Press the g button to quit.The Disc Navigation screen will be restored.Note :With a write-protected (see “Terminology” on page 148)disc or locked card, the remaining space will always bedisplayed as “0”.1Protecting Disc from Writing (Protect Disc)You can protect a DVD-RAM disc in order to prevent recorded images from being erased or edited by mistake. Furtherrecording will not be possible on protected disc until the protection is released.1 Press the DISC NAVIGATION button.2 Press the MENU button.3 Choose “Protect Disc” onthe “Disc” menu screen, andthen press the A button.4 The screen for verifyingprotection will appear:Choose “YES”, and thenpress the A button.Choose “NO” to cancelprotection.After “YES” or “NO”setting, the DiscNavigation screen will berestored.Note :To release disc protection,perform the same procedure as above: The screen forverifying the release of protection will appear.Choose “YES” to release the protection.Cap a c i t yCap a c i t y : 9 0%A p p r o x .V I DEO( X T R A ) : 17 m i nV I DEO( F I N E ) : 26 m i nV I DEO( S T D) : 54 m i nPHOTO : 9 9 6RETURNCap a c i t yCap a c i t y : 9 6%A p p r o x .PHOTO( F I N E ) : 4 6 2PHOTO( NORM) : 9 2 4PHOTO( ECO) : 1 1 4 8RETURN(When using disc)*1*2(When using card)D i s cRAMENTER RETURNCa pac i t yP r o t e c t D i scF o r ma t D i s cU p d a t e C o n t r o l I n f o .ETCENTERP r o t e c t D i s cYES NOW r i t e p r o t e c t d i s c ?0 01 / 019A l l P r og r a msPLAY RAMDisc protect icon