89Note :• The PHOTO Input setting can be confirmed using the on-screen information.• The PHOTO Input setting will be stored in memory evenwhen the DVD Video Camera is turned off.• Refer to “Recording (Dubbing) Images” on page 75 tosee how to connect the DVD Video Camera to anotherdevice.• “PHOTO Input” is displayed only when “Input Source” isset to “LINE” or “S LINE” (VDR-M70PP only).• “OSD Output” is displayed only when “Input Source” is setto “CAMERA”.13Self TimerYou can record photos using the self timer function, as with ordinary cameras.1 Press the MENU button,choose “Self Timer” on the“Record Functions Setup”menu screen, and then pressthe A button.2 Select “On”, and then pressthe A button.The self timer will be set.3 Press the MENU button to end the setting.4 Press the REC button.The recording indicator at the front of DVD VideoCamera will blink.The Self timer indicator will start to count down, andrecording will commence approximately 10 secondslater.Note :• You can also check that self timer has been set byreviewing the on-screen information.• To release the self timer mode, choose “Off” on the menuscreen or turn DVD Video Camera off.• To suspend self timer, press the REC button again beforerecording starts, or press the g button.• “PHOTO Input” is displayed only when “Input Source” isset to “LINE” or “S LINE” (VDR-M70PP only).• “OSD Output” is displayed only when “Input Source” is setto “CAMERA”.The self timer function is valid only when recording photos (stills).Se l f T i merRe c o r d F u n c t i o n s S e t u pOnO f fRAMOSD Ou t p u tI n p u t S o u r c eENTER RETURN1 0 9 9 9REM8 : 0 0 AMS E P 3 0 2 0 0 4Self timer recording
