13Quick Start Guide for SoftwareFeaturesThe following software programs are contained on the provided CD-ROM.• Confirming the environment of connecting equipment: see page 130.Installation Guide (see page 130 for details)1 Installing USB Driver.• Be sure you do not connect the USB Cable before installing the USB Driver.• Insert the provided CD-ROM into the PC and “Setup Menu” will activate: you can install the USB Driver fromthe “Setup Menu”.• After the installation completes, the PC can recognize the DVD Video Camera when the DVD Video Cameraand the PC are connected with the USB cable.2 Install the software (DVD-RAM Driver, MyDVD and DVD-MovieAlbumSE).• The software can also be installed from the “Setup Menu”.Note :If the “Setup Menu” does not appear, double-click the CD-ROM drive icon.Suggestions for using software (see page 141 for details)1 Connect this DVD Video Camera to the PC as illustrated below.• Please ensure a DVD-RAM disc with recorded material is loaded into the DVD Video Camera beforeproceeding.2 Edit motion image files using DVD-MovieAlbumSE.• You can edit motion image files on the DVD-RAM disc.Software FeatureUSB Driver Install this driver when using the provided USB Cable to connect thisDVD Video Camera to a PC.DVD-RAM Driver Install this driver when using stills and images recorded on a DVD-RAMdisc on a PC.DVD-MovieAlbumSE By combining DVD-MovieAlbumSE with VDR-M50PP/VDR-M70PP DVDVideo Camera, it is possible to use playback, recording and editing onthe DVD-RAM disc. It is also possible to transfer extracted data and titleinformation etc. to MyDVD.MyDVD Use this software when creating a DVD-Video disc from motion imagesedited using DVD-MovieAlbumSE.To USB port
