34SetupsThis section explains preparations for recording - setting up the DVD Video Camera and battery pack.Setting Up the DVD Video CameraHolding DVD Video CameraUsing Grip BeltInsert your right hand from the bottom of DVD VideoCamera up to the base of your thumb.Put your hand in a position where you can easily operatethe REC button and the Zoom lever.Adjust the length of grip belt so that the DVD VideoCamera is stable when you press the REC button withyour thumb.1) Detach the belt.2) Ajust the length of grip belt.3) Attach the belt.Note :Do not adjust the grip belt while holding the DVD Video Camera: Doing this could cause the DVD Video Camera to falland be damaged.To use as a Hand StrapUsing the Grip Belt as a hand strap makes it easier to carry the DVD Video Camera.1 Detach the Grip Belt from the Video Camera.1) Open the Lock cover.2) Push the Lock button and pull the grip belt fromthe DVD Video Camera.Support the DVD Video Camera securely by thehand to avoid falling.2 Make it a hand strap.1) Turn over the belt.2) Pull the tip in the derection of thearrow.3) Attach the belt.Lock coverLock coverLock buttonOpen the lock cover while pinching the protectionportion of both ends.Return the lock cover to the closed positionafter pulling out the grip belt.