74Replacing Disc in Round DVD Holder1 Open SIDE A of the Round DVD Holder, and replacethe disc in the holder with the SIDE A mark or labelsurface facing up, taking care not to touch the discsurface.2 Close SIDE A of the Round DVD Holder, and push itto lock the release levers at positions (3).When the Hinge of Round DVD Holder Comes Off1 Push the hinged portion of the holder piece markedSIDE A with thumb and middle finger, and warp it inthe direction of arrows (4).2 Fit the hinged portion of the other holder piece intothe warped hinge portion.Note :• Handle the disc carefully so that no scratches, dirt,fingerprints or dust adheres to the recording/playbacksurface.• When not using the Round DVD Holder, store it in a case:Do not leave a bare holder as is.• Be careful of dropping or impact: If you drop the RoundDVD Holder, the disc may pop out.• Do not subject the Round DVD Holder to force.Disc CleaningUse a soft, dry cloth to lightly wipe off any dust, dirt, etc.adhering to disc, as shown in the figure. Never usesolvent. Do not use thinner, water, anti-static spray, etc.to clean disc.33SIDE AmarkOPEN marksSIDE A mark side orLabel surface4SIDE A mark side Hinged portionsApprox. 90°Use soft lint-free cloth toclean from inner to outercircumference in axialdirection, or use puffer toblow dust off disc, like oncamera lens.
