46Inserting and Removing DiscInserting Disc1 Press down the DISC EJECT lever once and releaseit.A few moments after the ACCESS/PC indicatorblinks, the cover of disc insertion compartment willopen slightly.2 Gently open the cover by hand until it stops.3 Insert the disc, in Round DVD Holder, into the discguide until it stops.Note that the recording/playback surface of disc mustface the inside of DVD Video Camera. Theorientation for inserting the disc into the disc guide isalso specific: load the disc correctly, referring to thefigure below.• The disc exposed portion must face in the samedirection as the lens, as shown in figure.• The recording/playback side must face the inside ofDVD Video Camera.4 Push the section marked “PUSH CLOSE” on thecover of disc insertion compartment, to close thecover.5 Turn the DVD Video Camera on ( or ).When “DISC ACCESS” disappears, the DVD VideoCamera is ready for recording.lIdentifying recording/playbacksides of disc:Single sided disc:The recording/playback side isopposite to the printed label.Double-sided disc:The recording/playback side of“SIDE A” is opposite to the“SIDE A” marked side.The recording/playback side of“SIDE B” is the “SIDE A”marked side.Disc coverDISC EJECTleverPUSH CLOSEportionDisc guideCorrectorientationIncorrect orientation“SIDE A” markThe opposite side isthe “SIDE A”recording/playbackside.
