36Inserting Battery into Remote ControllerInsert the provided button type battery into remote controller.1 Slide the cover to remove it.2 Insert the button type battery with the positive Rterminal facing up.3 Slide the cover to close it.Note :The life of the button type battery is approximately one year.If the battery is discharged, no operation is possible withremote controller: Replace the battery.Removing Battery from Remote Controller1 While pushing the battery stopper, slide the batteryout.Warning :• KEEP THE BATTERY AWAY FROM CHILDREN ANDPETS.• IF SWALLOWED CONSULT A PHYSICIANIMMEDIATELY FOR EMERGENCY TREATMENT.• BATTERY MAY EXPLODE IF NOT HANDLEDPROPERLY. DO NOT RECHARGE, DISASSEMBLE ORDISPOSE OF IN FIRE.Note :• Dispose of battery safely in accordance with local laws.Do not dispose of in fire.• Do not short circuit the battery.• Do not hold the battery with metallic tweezers.• Keep the battery in a dark, cool, dry place.Battery stopperBattery stopperWhile pushingbattery stopperWarning :Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent typerecommended by the equipment manufacturer.Discard used batteries according to manufacturer’sinstructions. Risk of fire, explosion and burns. Do notrecharge, disassemble, heat above 212°F (100°C) orinclnerate, Keep the Button-Type battery out of thereach of children. Never put Button-Type battery inmouth. If swallowed, call your doctor.
