133Installing USB DriverUse the following procedure to install the USB Driver. The following instructions are an example for installing theUSB driver from the supplied CD-ROM. It is necessary to repeat steps 6-9 for using the card (Select “ “ in step 6).1 Insert the provided CD-ROM into the PC, and Click“USB Driver” on the “Setup Menu” screen.If the “Setup Menu” screen does not appear, double-click the CD-ROM drive icon.2 The driver setup screen will appear: Click the “USBDriver Installation” button.3 When using Windows ® XP Home Edition/XPProfessional, click “OK”: A message will appear,read the message, and then click “OK”.When using OS other than Windows ® XP HomeEdition/XP Professional, skip this step.4 When using Windows ® XP Home Edition/XPProfessional, click “Continue Anyway”.When using OS other than Windows ® XP HomeEdition/XP Professional, skip this step.5 Click “Quit”.6 Set the power switch of DVD Video Camera to“ “, and then use the provided USB cable toconnect the DVD Video Camera to the USB port ofPC.The "Found New Hardware" icon will appear.When using OS other than Windows ® XP HomeEdition/XP Professional, installation of the USBdriver is completed. If any message will appear,follow instructions on screen.When using Windows® XP Home Edition/XPProfessional, proceed to the next step.7 When the “Found New Hardware Wizard” screenappears, make sure that “Install the softwareautomatically (Recommended)” has been checked,and then click “Next”.ClickClickClickClickCheck Click
