59Playing Back123Playing Back1 Press A button in recording pause mode.The DVD Video Camera will enter the playbackmode, and the scene you have recorded last will beplayed back.When playback is finished, the DVD Video Camerawill enter pause mode at the last image on disc.If playback pause mode continues for as long as 5minutes, the DVD Video Camera will automaticallyreturn to recording pause mode.2 Press the g button.Playback will stop, and recording pause mode will berestored.Note :• During playback of movie, playback sound will be heardfrom the speaker. Adjust the sound volume using thevolume control buttons ((, )).• You can play back the audio recorded in Dolby AC 3 (2ch).• To temporarily stop playback, press the A button.Press the A button again to restart playback.• Even if you stop playback midway and immediately startrecording again, the new image will be recorded after thelast scene on disc or card (the previous images will not beoverwritten).• Image data edited on PC or certain types of image datamay not be displayed on this DVD Video Camera.• Image data recorded on another camcorder may not beplayable on this DVD Video Camera.• Depending on the amount of data to be played back, itmay take some time for the playback image to appear.• Do not operate the power switch or remove the card whilethe ACCESS/PC or CARD ACCESS indicator is lit orblinking: Doing so may damage the card or the data oncard.Before You Begin • Insert a disc or card recorded on this DVD Video Camera (P. 46, 49).• Turn the DVD Video Camera on (P. 50).