92123Initial SettingsSwitching Operating Sound On or Off (Beep)1 Press the MENU button,choose “Beep” on the“Initial Setup” menu screen,and then press the Abutton.2 Select “On” or “Off”, and then press the A button.3 Press the MENU button to end setting.Note :The “Beep” setting will be stored in memory even when theDVD Video Camera is turned off.Turning DVD Video Camera Off Automatically (Power Save)1 Press the MENU button,choose “Power Save” on the“Initial Setup” menu screen,and then press the Abutton.2 Select “On” or “Off”, andthen press the A button.3 Press the MENU button to end setting.Note :• To turn the DVD Video Camera on again from automaticoff activated by the power save function, set the powerswitch to “OFF”, and then set it to “ ”, “ ” or “ ”.• The Power Save setting will not appear in the on-screeninformation display.• The Power Save setting will be stored in memory evenwhen the DVD Video Camera is turned off.Setting ContentsOn Beep is heard when the power switch is turned on/off, the REC button is pressed,etc.Off No beep is heard.I n i t i a l S e t u pOnO f fRAMP o w e r S a v eBe e pENTER RETURNRe s e tL a n g u a g eR e c o r d L E DSetting ContentsOn To engage power save. If the DVD Video Camera is left in recording pause modewithout being operated for 5 minutes, it will automatically turn off to prevent thebattery from discharging needlessly.Off To cancel power save.I n i t i a l S e t u pOnO f fRAMP o w e r S a v eBe e pR e c o r d L E DENTER RETURNRe s e tL a n g u a g e