83Using the Electronic Image Stabilizer (EIS)When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.1 Press the MENU button,choose “EIS” on the“Camera Functions Setup”menu screen, and then pressthe A button.2 Choose “On” or “Off”, andthen press the A button.3 Press the MENU button to end setting.lChecking whether EIS is On or OffYou can check whether EIS is On or Off by the on-screeninformation display.After recording with EIS set to “Off”, it is recommendedthat you return the setting to “On” and then turn the DVDVideo Camera off, unless you normally record with EIS“Off” setting.Note :• The EIS setting will be stored in memory even when theDVD Video Camera is turned off.• It is recommended that you specify “EIS: Off” when usingthe DVD Video Camera on a desk or tripod.• When “EIS: On” is specified, there will be a slightdifference between the actual movement and themovement on screen.• Gross camera shake may not be entirely corrected evenif “EIS: On” is specified. Firmly hold the DVD VideoCamera with both hands.• EIS may not operate correctly when the tele or wide-conversion lens (optional-user provided) is used.• When you record pictures with setting 10x or more ofmagnification and turning the EIS to “ON” in dim places,after-images may stand out. In this case, we recommendusing a tripod with turning the EIS to “OFF” (only for VDR-M50PP).• The EIS function cannot be used when still images arerecorded on the card (only for VDR-M70PP).Reducing Wind Noise during Recording (Wind Cut)When recording sound from the microphone built into this DVD Video Camera, you can reduce wind noise inrecording.If “Wind Cut: ON” is specified, the low-frequency components in the sound picked up by microphone will be cut offduring recording: This makes it easier to hear the target voice or sound during playback.1 Press the MENU button,choose “Wind Cut” on the“Camera Functions Setup”menu screen, and then pressthe A button.2 Choose the desired option,and then press the A button.3 Press the MENU button toend setting.Note :• You can also use the on-screen display to confirm thatWind Cut has been set.• The Wind Cut setting will be stored in memory even whenthe DVD Video Camera is turned off.• The Wind Cut function will work only during movierecording.• The Wind Cut function works only with the built-inmicrophone: It will not function when using an externalmicrophone (P. 68).Ca m e r a F u n c t i on s S e t u pP r o g r a m AEWh i t e Ba l .D i g . Z o omE I SO f fOnENTER RETURN RAMW i n d Cu tW i d e3 0 MIN0 : 0 0 : 0 0REMFINE8 : 0 0 AMS E P 3 0 2 0 0 4EISCam e r a F u n c t i o n s S e t u pRAMP r o g r a m AEWh i t e Ba l .D i g . Z o o mW i n d C u tE I SENTER RETURNW i d e O f fOn3 0 MIN0 : 0 0 : 0 0REMFINE8 : 0 0 A MS E P 3 0 2 0 0 4Wind cut icon