161When the DVD Video Camera is connected to PC:Symptom Cause and Correction ReferencepageNo drive icon appears onPC.The DVD Video Camera is not turned on.Check the power supply. 50Driver is not properly recognized.Turn PC off and on again. If the drive icon still does not appear, use“Refresh driver” in Device Manager to reinstall the driver.Turn PC off and then disconnect the USB cable. Turn PC on again,and then use the USB cable to connect the DVD Video Camera toPC.Make sure the USB cable is completely plugged into this DVD VideoCamera. If a yellow “!” mark is attached to some device in Windows ® DeviceManager, uninstall the USB device driver, and then reinstall it,following the procedure on page 133.Error occurs in playbackof DVD Video Camera onPC.If error occurs with USB connection, the transfer rate is not sufficient.It is recommended that you use a USB terminal conforming toUSB2.0 when connecting the DVD Video Camera.148Application isabnormally run on PC.Turn the PC and DVD Video Camera off, and try again. Error occurs duringwriting to DVD-R disc.The temperature of DVD Video Camera is too high due to continuousoperation.Disconnect the DVD Video Camera from PC once, remove the discfrom the DVD Video Camera, and then turn it off. After a fewmoments, connect them again and write to a brand-new disc.Transfer of images stops. Connect the DVD Video Camera to another USB terminal of PC. Ifyour PC is a desktop type, it is recommended that you use USBterminal on the back of PC.DVD-RAM/R/RW drivebuilt into PC cannot beused after the providedsoftware has beeninstalled.This problem may be solved if the software related to DVD-RAM/R/RW of your PC is upgraded, or if the DVD-RAM driver is uninstalled.However, with Windows ® 98 Second Edition / Me / 2000Professional, uninstalling the DVD-RAM driver will make itimpossible for the JPEG stills recorded on DVD-RAM on this DVDVideo Camera to be read by the PC.DVD-R disc cannot beplayed back on DVD-MovieAlbumSE.DVD-MovieAlbumSE does not support playback or data read onDVD-R disc: Use optional-user provided DVD video playbacksoftware to play back DVD-R disc on PC.138Error appears whenstarting DVD-MovieAlbumSE.Make sure that your PC display adapter (video card) conforms toDirectX 8.1. Video written to hard diskof PC cannot be editedon DVD-MovieAlbumcopy tool.DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard diskof PC: Copy the data to another DVD-RAM disc and then edit it. Movies are notrecognized byapplication in PC.Make sure the power switch of this DVD Video Camera is set to“ ”, “ ” or “ ”. The DISC EJECT leverdoes not work when theDVD Video Camera isconnected to PC.While the DVD Video Camera is connected to PC, use Explorer toright-click the DVD Video Camera drive icon and execute “Eject”.
