141Sonic Solutions Corporation, which developedMyDVD, recommends user registration of MyDVD,in order to offer appropriate support to customers.The guide for user registration will appear when youstart MyDVD for the first time, or you can do it anytime by accessing the following URL:http://www.mydvd.com(You will need an Internet connection for userregistration.)For registered customershttp://support. sonic. comTelephone Customer Support (For registeredcustomers only)1-877-383-11249am-6pm Pacific Standard Time. USA (Weekdaysonly)Creating DVD Video on PC from DVD-RAM DiscRecorded on DVD Video CameraUsing DVD-MovieAlbumSE and MyDVD, you can create a DVD Video disc (DVD-R disc) from the imagesrecorded on this DVD Video Camera, following the procedure below:1 Insert a recorded DVD-RAM disc into the DVDVideo Camera, and connect the DVD Video Camerato the USB terminal of PC.2 Start DVD-MovieAlbumSE, and edit the images onDVD-RAM disc as necessary.When starting DVD-MovieAlbumSE, MountInformation window may appear or the recordedmovies may not be shown. If it has occured, try thefollowing procedure.1. Click “Preference”, and then “Device setting”.2. Select the drive in which the DVD-RAM disc isinserted. In the “Drive Select” column, click"OK".3 Right-click the thumbnail from which you wish tocreate a DVD Video disc on the DVD-MovieAlbumSE screen, and execute “Export”.4 The “Program Export” screen, shown below, willappear: Choose “Same Resolution” and check “UseDVD-Video (LPCM)” in the “Export Mode” settingbox. Choose “704 × 480 (recommended)” for“Resolution”.“Preference” tab“Program Export” Screen