Specifications HL-G1 User's Manual1248.1 Sensor Head SpecificationsThe sensor head specifications are listed in the table below. NOTEThe following measurement conditions apply unless otherwise specified:- Power voltage: 24V DC- Ambient temperature: 20°C- Sampling cycle: 500μs- Number of measurement values used for averaging: 1024 values- Measurement object: white ceramicWhere standard and multifunction type differ in the specification, the table row is shaded ingray.Model No.Characteristic HL-G103-□-□ HL-G105-□-□ HL-G108-□-□ HL-G112-□-□Supply voltage 24V DC ±10% including ripple 0.5V (P-P)Current consumption 100mA max.Measurement method Diffuse reflectionMeasurement center dis-tance30mm 50mm 85mm 120mmMeasuring range ±4mm ±10mm ±20mm ±60mmBeam source Red semiconductor laser Class 2 (JIS/IEC/FDA laser notice No. 50)Max output: 1mW, Emission peak wavelength: 655nmBeam dimensions (seenote 1)0.1×0.1mm 0.5×1mm 0.75×1.25mm 1.0×1.5mmBeam receiving element CMOS image sensorResolution 0.5μm 1.5μm 2.5μm 8μmLinearity ±0.1% F.S.Temperature characteris-tics±0.08% F.S./°CSampling cycle 200μs, 500μs, 1ms, 2msAnalog output Voltage: Output range: 0 to 10.5V (normal), 11V (at alarm) Output impedance: 100Current: Output range: 3.2 to 20.8mA (normal), 21.6mA (at alarm) Load impedance: 300 max.Rugghölzli 2CH - 5453 BusslingenTel. +41 (0)56 222 38 18Fax +41 (0)56 222 10 12mailbox@sentronic.comwww.sentronic.comProdukte, Support und ServiceSENTRONIC AG
