Inputs and Outputs HL-G1 User's Manual243.1 Wiring Colors NOTEThe sensor heads produced before December 2010 use different wire colors.Please check the wire colors on the sensor head you are using.Analog output linesPin No. Signal name Function Lead wire color7 A(V) Analog voltage output8 AGND Analog groundShielded singleconductor Black9 A(I) Analog current output10 AGND Analog groundShielded singleconductor GrayI/O terminal blockPinNo.Signalname Function Lead wire color1 OUT1 Judgment output 1 Black2 OUT2 Judgment output 2 White3 OUT3 Judgment output 3 or alarm output Gray4 TM Timing input Pink5 MIMultifunction input: Zero set, zero set OFF, reset,change memory, teach, save, and laser controlNote: The function of the MI signal is deter-mined by the duration of the signal (see page26).Violet6 NP NPN/PNP type switching input (default = NPN) Pink/Violet11 +SD Transmission data Green(before Dec 2010: Black)12 -SD Transmission dataTwisted-pairwire Sky blue(before Dec 2010: White)13 +RD Reception dataOrange(wire color has notchanged)14 -RD Reception dataTwisted-pairwire Yellow(before Dec 2010: White)15 GGND RS422/485 shield16 +V 24V DC input for power supply Brown17 0V Power supply ground Blue NOTE There are no SD/RD lines available for the HL-G1□□-A-C5 standard types.Rugghölzli 2CH - 5453 BusslingenTel. +41 (0)56 222 38 18Fax +41 (0)56 222 10 12mailbox@sentronic.comwww.sentronic.comProdukte, Support und ServiceSENTRONIC AG
