Compax3 Xxxx I22T11 Introduction C3I22T1124 192-120114 N5 C3I22T11 June 2008Due to its high functionality, the Positioning version of Compax3 forms an idealbasis for many applications in high-performance motion automation.Up to 31 motion profiles with the motion functions: Absolute or relative positioning, electronic gearing register-related positioning, speed control, Stop - Set ...can be created with the help of the PC software.Via different operating modes: Speed Control Direct positioning Positioning with set selectionthe motion functions can be triggered via the bus.A number of different transfer telegrams, which can be conveniently adjusted withthe Compax3 ServoManager), can be used to adjust cyclic bus communication tothe requirements of specific applications.High-performance control technology and openness for various sender systemsare fundamental requirements for a fast and high-quality automation of movement.The structure and size of the device are of considerable importance. High-qualityelectronics are a fundamental requirement for the particularly small and compactform of the Compax3 devices. All connectors are located on the front of the Com-pax3S.Partly ingegrated mains filters permit connection of motor cables up to a certainlength without requiring additional measures. EMC compatibility is within the limitsset by EN 61800-3, Class A. The Compax3 is CE-conform.The intuitive user interface familiar from many applications, together with the oscil-loscope function, wizards and online help, simplifies making and modifying settingsvia the PC.The optional Operator control module (BDM01/01 (see page 378)) for Com-pax3S/F makes it possible to exchange devices quickly without requiring a PC.Configuration is made on a PC using the Compax3 ServoManager.General proceeding (see page 102)2. Compax3 Xxxx I22T11 IntroductionCompax3 controltechnologyModel / standards /auxiliary materialConfiguration
