Patton electronics NetLink 1001MC Operation Manual

Contents

Introduction 169Model 1001MC Operations Guide 8 • Model 2707RC managementIntroductionThis chapter describes managing a Model 2707RC NetLink-G.703 network termination unit (NTU) usingthe Model 1001MC NetLink-NMS internal HTTP/HTML web engine and a standard web browser. Thischapter is meant to be used in addition to the manual that came with your unit.NetLink-NMS descriptionSpecifically designed for use in the Patton NetLink system, when the NetLink-G.703 NTU is coupled with theModel 1001MC NetLink-NMS and the Patton Model 1001 rack system, the modem is fully SNMP manageable.SNMP management can be performed on both the local and remote units using a standard SNMP network man-agement station (NMS) or by using a standard web browser and the Model 1001MC's built-in web server. Youcan view and change configuration variables, view statistical variables, and view error and warning indications.Configuration and managementThis section describes the configuration and management of your NetLink G.703 NTUs using a Model1001MC NetLink-NMS with built in HTTP/HTML web server. If you plan to manage your units using astandard network management station you can download the Patton Enterprise MIBs either through theSNMP web page on the Model 1001MC or obtain them from the Patton web site at www.patton.com.The following pages are used to configure and manage the Model 2707RC:• Modem Information Rack X page: This page displays a list of the cards that are installed in your system anda quick view of any errors or warnings associated with your modems (see section “Displaying the ModemInformation page” on page 170)• Model 2707RC Configuration Slot page: This page (along with the Model 2707RC Configuration—Con-figuration page) enables you to make configuration changes to the Model 2707RC and the remote CPE box(see section “Displaying the Model 2707RC Configuration Slot page” on page 172)• Model 2707RC Configuration—Next Configuration page: This page (along with the Model 2707RC Con-figuration Slot page) enables you to update configuration of modems installed in the system (see “Display-ing the Model 2707RC Configuration—Configuration page” on page 174)• Slot Configuration page: This page can be used to set slot-specific information related to the system and howthe system treats the slot in the case of errors or warnings (see section “Displaying the Model 2707RC Con-figuration Slot page” on page 172)Note For information about other Model 1001MC pages, refer tochapter 10, “HTTP/HTML web page reference” on page 220.