System Log—Modify 253Model 1001MC Operations Guide 10 • HTTP/HTML web page referenceSNMP Trap Daemon IP Address (syslogTrapIP)SNMP traps are generated for line down, line up, card lost, power supply 1 fail, and power supply 2 fail events.The specific trap numbers are as follows:The Trap IP address is assigned on the System Log page. If the IP address is assigned, SNMP traps will be sentto that IP address. For line up and line down traps, Line down indication has to be set to error(2) on the SlotConfiguration page for each card (see section “Slot Configuration” on page 243).The line up, line down, and card lost trap messages will include the box name, rack number, card number inthat rack, and local circuit ID in the trap string followed by a description of the trap. For example, the string ina line up trap will resemble: Model 1001MC Demo, Rack Number: 1, Card Number: 12, Local Circuit ID: TestCircuit, Line Up Addr: 12.Type the IP address into the text box, then click the Submit button.Note After submitting the change, you must click on the Record CurrentConfiguration button located on the HOME page to store the config-uration changes into memory (see “HOME” on page 228 for moreinformation).PriorityMin Priority for SysLog DaemonSpecify the minimum priority for a message that will be sent to the SysLog Daemon. The following options areavailable:• priorityVerbose(5)• priorityDebug(10)• priorityInfo(20)• priorityOddity(40)• priorityService(60)• prioritySystem(80)• priorityDisable(1000)For most situations, set the outputs that are being used to prioritySystem(80). For unused output mechanisms,set the priority to priorityDisable(1000). Select the priority setting from the pop-up menu, then click the Sub-mit button.Trap Description Specific Trap NumberTRAP_ID_POWER_ONE_FAIL 1TRAP_ID_POWER_TWO_FAIL 2TRAP_ID_CARD_LOST 3TRAP_ID_LINE_UP 4TRAP_ID_LINE_DOWN 5
