System Log—Modify 254Model 1001MC Operations Guide 10 • HTTP/HTML web page referenceNote After submitting the change, you must click on the Record CurrentConfiguration button located on the HOME page to store the config-uration changes into memory (see “HOME” on page 228 for moreinformation).Min Priority for Flash StorageSpecify the minimum priority for a message that will be sent to Flash storage. The following options are available:• priorityVerbose(5)• priorityDebug(10)• priorityInfo(20)• priorityOddity(40)• priorityService(60)• prioritySystem(80)• priorityDisable(1000)For most situations, set the outputs that are being used to prioritySystem(80). For unused output mechanisms,set the priority to priorityDisable(1000). Select the priority setting from the pop-up menu, then click the Sub-mit button.Note After submitting the change, you must click on the Record CurrentConfiguration button located on the HOME page to store the config-uration changes into memory (see “HOME” on page 228 for moreinformation).Min Priority for RAMSpecify the minimum priority for a message that will be sent to RAM. The following options are available:• priorityVerbose(5)• priorityDebug(10)• priorityInfo(20)• priorityOddity(40)• priorityService(60)• prioritySystem(80)• priorityDisable(1000)For most situations, set the outputs that are being used to prioritySystem(80). For unused output mechanisms,set the priority to priorityDisable(1000). Select the priority setting from the pop-up menu, then click the Sub-mit button.Note After submitting the change, you must click on the Record CurrentConfiguration button located on the HOME page to store the config-
