Booting the Model 1001MC 38Model 1001MC Operations Guide 3 • Getting started5. After pressing the b key three times the system will display the following:Timer Started May 11 1999 14:44:24Timer installedClock installedTrying the console---Ethernet Hardware---Address: 00.a0.ba.00.01.71---Current IP settings---IP:192.168.200.1Mask:255.255.255.0Gateway:209.49.110.1Change IP settings (y/n)?4. Type Y to change the IP address. You will be prompted to enter a new IP address, mask, and default gate-way as follows:---Current IP settings---IP:209.49.110.188Mask:255.255.255.0Gateway:209.49.110.1Change IP settings (y/n)? yUser Set IP:209.49.110.188User Set Mask:255.255.255.0User Set Gateway:209.49.110.1---Settings to save---IP:209.49.110.188Mask:255.255.255.0Gateway:209.49.110.1Save these settings (y/n)? Y5. After entering the information, the system will prompt you to save the IP settings. Type Y to save thenew settings.6. The Model 1001MC will prompt you for changes to the hardware revision that your unit requiresas follows:---Hardware Initialization---Current Hardware Revision BChange Hardware Revision (y/n)? nNote In most cases you should select N to keep the current revision. Thehardware revision should only be changed if you are upgrading to thelatest firmware release.
