Introduction 49Model 1001MC Operations Guide 4 • Model 1092ARC managementIntroductionThis chapter describes managing a Model 1092ARC NetLink iDSL modem using the Model 1001MCNetLink-NMS internal HTTP/HTML web engine and a standard web browser. This chapter is meant to beused in addition to the manual that came with your unit.NetLink-NMS descriptionSpecifically designed for use in the Patton NetLink system, when the NetLink iDSL is coupled with the Model1001MC NetLink-NMS and the Patton Model 1001 rack system, the modem is fully SNMP manageable.SNMP management can be performed on both the local and remote units using a standard SNMP network man-agement station (NMS) or by using a standard web browser and the Model 1001MC’s built-in web server. Youcan view and change configuration variables, view statistical variables, and view error and warning indications.Configuration and managementThis section describes the configuration and management of your NetLink iDSL modems using a Model1001MC NetLink-NMS with built in HTTP/HTML web server. If you plan to manage your units using astandard network management station you can download the Patton Enterprise MIBs either through theSNMP web page on the Model 1001MC or obtain them from the Patton web site at www.patton.com.The following pages are used to configure and manage the Model 1092ARC:• Modem Information page: This page displays a list of the cards that are installed in your system and a quickview of any errors or warnings associated with your modems (see section “Displaying the Modem Informa-tion page” on page 50)• Model 1092 Configuration Slot page: This page (along with the Model 1092 Configuration—Next Config-uration page) enables you to make configuration changes to the Model 1092A and the remote CPE box (seesection “Displaying the Model 1092 Configuration Slot page” on page 52)• Model 1092 Configuration—Next Configuration page: This page (along with the Model 1092 Configura-tion Slot page) enables you to update configuration of modems installed in the system (see “Displaying theModel 1092 Configuration—Next Configuration page” on page 54)• Slot Configuration page: This page can be used to set slot-specific information related to the system and howthe system treats the slot in the case of errors or warnings (see section “Displaying the Model 1092 Configu-ration Slot page” on page 52)Note For information about other Model 1001MC pages, refer tochapter 10, “HTTP/HTML web page reference” on page 220.
