SCSI Commands: 45BSEND DIAGNOSTIC Page 2063.33.2 SEND DIAGNOSTIC Completion StatusCode Message Description00h GoodStatus• The drive is ready to perform any appropriate command.• The drive remains in any previously set mode.• The tape position is not changed.02h CheckConditionUse the REQUEST SENSE command to retrieve status information.Possible Sense Keys are:Code Message Description02h Not Ready No cartridge is inserted in the drive.04h Hardware Error Drive hardware failure detected.05h Illegal Request The CDB contains an invalid bit field or theparameter list length is invalid or theparameter list contains an invalid field.06h Unit Attention The cartridge was changed, or the drive wasreset prior to this command.
