SCSI Commands: 16BERASE Page 283.4.2 ERASE Completion StatusCode Message Description00h Good Status • The drive remains in any previously set modes.• The drive is ready to perform any appropriate command.Note: If IMMED is one, then Good Status only indicates that the command isvalid.02h CheckConditionUse the REQUEST SENSE command to retrieve status information.Possible Sense Keys are:Code Message Description02h Not Ready No cartridge is in the drive.03h Media Error Unrecoverable data error encountered.04h Hardware Error Parity error on the SCSI bus or drive hardwarefailure detected.05h Illegal Request The Command Descriptor Block is invalid.06h Unit Attention The cartridge was changed or the drive wasreset prior to this command.07h Write Protect The cartridge is write protected.
