SCSI Commands: 54BWRITE FILEMARKS Page 2253.42.2 WRITE FILEMARKS Completion StatusCode Message Description00h GoodStatus• The filemarks have been sent to the buffer.• The drive remains in any previously set mode.Note: If IMMED is one, then Good Status only indicates that the command isvalid.02h CheckConditionUse the REQUEST SENSE command to retrieve status information. PossibleSense Keys are:Code Message Description02h Not Ready No cartridge is in the drive.03h Media Error Unrecoverable data error encountered.04h Hardware Error Parity error on the SCSI bus or drive hardwarefailure.05h Illegal Request The Command Descriptor Block is invalid.06h Unit Attention The cartridge was changed, or the drive wasreset prior to this command.07h Write Protect The tape is write-protected; check the cartridgebefore continuing.0Dh Volume The command completed with Overflow data inthe buffer because EOM was encountered.
