SCSI Commands: 21BLOG SENSE Page 573.9.9 TapeAlert Response Log Page (12h)The TapeAlert Response Log Page supports the Automation/Drive Interfacestandards to provide the TapeAlert flags also reported in Log Page 2Eh. Theparameters may not be set to zero or changed with the use of a LOG SELECTcommand.BitByte 7 6 5 4 3 2 1 00 Reserved PAGE CODE (12h)1 Reserved2 (MSB)3 PAGE LENGTH (0Ch) (LSB)4 (MSB)5 PARAMETER CODE (0000h) (LSB)6 DU (0b) DS(1b) TSD (1b) ETC (0b) TMC (00b) LBIN(1b) LP(1b)7 PARAMETER LENGTH (08H)8 FLAG01 FLAG02 FLAG03 FLAG04 FLAG05 FLAG06 FLAG07 FLAG089 FLAG09 FLAG10 FLAG11 FLAG12 FLAG13 FLAG14 FLAG15 FLAG1610 FLAG17 FLAG18 FLAG19 FLAG20 FLAG21 FLAG22 FLAG23 FLAG2411 FLAG25 FLAG26 FLAG27 FLAG28 FLAG29 FLAG30 FLAG31 FLAG3212 FLAG33 FLAG34 FLAG35 FLAG36 FLAG37 FLAG38 FLAG39 FLAG4013 FLAG41 FLAG42 FLAG43 FLAG44 FLAG45 FLAG46 FLAG47 FLAG4814 FLAG49 FLAG50 FLAG51 FLAG52 FLAG53 FLAG54 FLAG55 FLAG5615 FLAG57 FLAG58 FLAG59 FLAG60 FLAG61 FLAG62 FLAG63 FLAG64A FLAGXX bit set to one indicates the TapeAlert state flag is set. A FLAGXX bit setto zero indicates the TapeAlert state flag is not set.Refer to Log Page 2Eh for the list of supported flags and additional information onTapeAlert and the LTO drive.
