SCSI Commands: 21BLOG SENSE Page 72ASC/ASCQDrive ModeFlag 3Hard errorFlag 5Read failureFlag 6Write failure Description03/03/02 Write X X Excessive write errors03/09/00 Read X X Track following error03/09/00 Write X X Track following error03/09/00 Position X Track following error03/0C/00 Write X X Write error03/0C/0B Write X X Auxiliary memory write error03/11/00 NA X X Unrecovered read error03/11/02 Read X X Error too long to correct03/31/00 Read X X Medium format corrupted03/3B/00 Read X X Sequential positioning error03/3B/00 Write X X Sequential positioning error03/3B/00 Position X Sequential positioning error03/3B/08 Position X Reposition error03/50/00 Write X X Write append error03/50/01 Write X X Write append position error03/51/00 Write X Erase failure03/52/00 Read X X Cartridge fault03/52/00 Write X X Cartridge fault03/52/00 Position X Cartridge fault3.9.13.2.2 TapeAlert Table Heading Descriptions and AbbreviationsHeading/Abbreviation DescriptionASC/ASCQ Additional Sense Code/Additional Sense Code QualifierCondition Setting Flag A condition when results in setting a TapeAlert flag.Condition Clearing Flag A condition that when true results in clearing a TapeAlertflag. Note that all flags are cleared on a reset or on readingLog Page 2EhFlag TapeAlert flag number in decimalFlag Name TapeAlert flag name as defined in SCSI standardsMode Drive mode (read, write, or positioning)MIC Memory in cartridgeHWP Hardware write protectSWP Software write protectHW HardwareWORM Write once read many3.9.14 Tape Usage Log Page (30h)The Tape Usage Log Page returns information about the current tape cartridge.These values are all read directly from the tape log. The Page Control, PC, field isignored and accumulated values are always returned.
