SCSI Commands: 51BWRITE Page 218is encountered. Any WRITE command issued within Early Warning and successfullycompleted finishes with a Check Condition and the EOM bit set.3.39.2 WRITE Completion StatusCode Message Description00h GoodStatus• The SCSI data has been transferred to the data buffer.• The drive remains in any previously set mode.02h CheckConditionUse the REQUEST SENSE command to retrieve status information. PossibleSense Keys are:Code Message Description02h Not Ready No cartridge is in the drive.03h Media Error Unrecoverable data error encountered.04h Hardware Error Parity error on the SCSI bus or drive hardwarefailure.05h Illegal Request The Command Descriptor Block is invalid.06h Unit Attention The cartridge was changed, or the drive was resetprior to this command.07h Write Protect The tape is write-protected; check the cartridgebefore continuing.0Dh Volume Overflow The WRITE command completed with data in thebuffer because the end-of-partition wasencountered.
