Chapter 8 Extended Data Lifecycle ManagementIncomplete EDLM ScansScalar i500 User’s Guide 2206 Select the drive(s) you want to add to the partition from the table.Only EDLM scanning drives appear in the list.7 Click Next.The Create Partition - EDLM Policy Settings screen appears (seeFigure 34 on page 221).8 If desired, set EDLM scanning policies on this EDLM librarymanaged partition (go to Step 5: Setting Up Automatic EDLMScanning Policies on Partitions on page 220).9 If you do not wish to configure automatic EDLM scanning policies onthe partition, click Apply to finish.Step 5: Setting Up Automatic EDLM Scanning Policies on Partitions8You can set EDLM scanning policies on both standard partitions and onEDLM library managed partitions. Once configured, scanning takes placeautomatically per the policies. You can temporarily stop automatic scanson partitions by using the Pause feature (see Pausing EDLM Scans onPartitions on page 226).1 Log on as an administrator.2 From the Web client, select Setup > Partitions.3 Click Create to create a new partition, or select a partition and clickModify to modify an existing partition.4 When finished configuring the general settings, click Next.The Create Partition - EDLM Policy Settings screen appears (seeFigure 34 and Figure 35).Note: The Select Emulation Type and Select Media BarcodeFormat fields are not selectable when creating EDLMlibrary managed partitions.Note: Fewer policies are available on EDLM library managedpartitions because they are inaccessible to hosts.
