Chapter 3 Configuring Your LibraryUsing the Setup WizardScalar i500 User’s Guide 58• Welcome (operator panel) — Welcomes you to the Setup Wizard.• Hardware Installation (operator panel) — Reminds you to install tapedrives and the Ethernet cable.• Setting the Date, Time, and Time Zone (operator panel and Webclient) — Allows you to set the date and time on your library.• Managing the Network (operator panel) — Allows you to configureyour IPv4 network settings for remote access using the Web client.Allows you to enable IPv6 so that you can configure IPv6 networksettings later using Setup > Network Mgmt.• Applying a License Key (operator panel and Web client) — Allowsyou to enter license keys for licensable features. For moreinformation, see Obtaining and Installing a License Key on page 88.• Configuring Cleaning Slots (operator panel and Web client) —Allows you to configure dedicated cleaning slots. Configuring atleast one cleaning slot enables the AutoClean feature.• Configuring I/E Station Slots (operator panel and Web client) —Allows you to configure import/export (I/E) station slots.• Working With Partitions (operator panel and Web client) — Allowsyou to set the number of library partitions.• Confirm Settings (operator panel and Web client) — Allows you toconfirm your library settings.Caution: Always take a library snapshot and save the libraryconfiguration after modifying configurable items. Ifmodifying items results in problems, the library snapshotwill help technical support personnel to troubleshoot theproblem. Saving the library configuration will allow youto restore the most current settings if necessary. For moreinformation on taking a library snapshot and saving andrestoring the library configuration, see Saving andRestoring the Library Configuration on page 494.Note: Setup Wizard operations cannot be performed concurrently bymultiple administrators logged in from different locations.You can access the screens, but you cannot apply changeswhile another administrator is performing the same operation.
