Chapter 3 Configuring Your LibraryUsing the Setup WizardScalar i500 User’s Guide 56• If you are using IPv6: On the Setup Wizard: Enable IPv6 screen,select the Enable IPv6 check box and click Next. You have enabledIPv6 but you will not be prompted to configure IPv6 settingshere. Continue with the Setup Wizard screens. Then, when youare finished using the Setup Wizard, configure the IPv6 networksettings by going to Setup > Network Mgmt on the operator panel.4 Log out of the operator panel.5 Using the default administrator account, log in to the Web client.Type admin in the User Name text box and password in the Passwordtext box.6 Complete the Setup Wizard screens on the Web client interface. Thefinal Setup Wizard screen will prompt you to apply your settings.When you have completed the Setup Wizard, the LibraryConfiguration report appears on the Web client. The LibraryConfiguration report provides information on the library’s tapedrives, partitions, I/E stations, storage slots, cleaning slots, andloaded media. See Viewing the Library Configuration Report onpage 272 for more information on the Library Configuration report.Details on using the Setup Wizard include:• The only time that you do not need to log in to the library is when theSetup Wizard appears on the operator panel the first time the libraryis powered on.• After a timeout period of one hour, the Setup Wizard will close, andyou will be logged out of the library. Use the default administratoraccount to log in to the operator panel.• If you time out of the Setup Wizard or do not complete all the SetupWizard screens, the library will apply the default configurationsettings plus whatever modifications you made (see DefaultConfiguration Settings on page 57).• You cannot log in to the library from the Web client until you haveconfigured network settings on the operator panel. To change IPv4settings and configure IPv6 settings, go to Setup > Network Mgmt.Note: Depending on the size of the library, there may be a slightdelay after you apply the settings in the Setup Wizardwhile the Library Configuration report page loads.
