Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 423 (Page 1 of 1)MMC: 423 S/T MODEDESCRIPTION:Allows the system to choose the function of each BRI access. You can set a BRIaccess as "TRUNK" to which an ISDN C.O. line is connected, or as "STATION"to which an ISDN terminal is connected.NOTEAny change made in this MMC will take effect only after restarting the BRI card. Use MMC 418 torestart the card.For each BRI access, two adjacent ports are assigned. You need only changethe value for one of the two ports; the value for the other port will be changedautomatically.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryACTION DISPLAY1. Press TRSF 423Display shows [701] S/T MODETRUNK2. Dial BRI trunk number (e.g. 703)ORPress UP or DOWN key to select the portPress the RIGHT soft key to move the cursor[703] S/T MODETRUNK3. Press UP or DOWN key to make selection(TRUNK or STATION) and press RIGHT softkey[703] S/T MODESTATION4. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: TRUNKRELATED ITEMS: MMC 418 Card RestartMMC 419 BRI OptionMMC 424 S0 Mapping