Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG System Administration and Special Features GuideDCS-816 February, 19993 - 83.9 PROGRAM PERSONAL SPEED DIAL NUMBERS FOR OTHERSTATIONSIndividual station users can program their own numbers, but in cases where this is notpractical, or for single line telephone users, this program allows a system administrator toview or change any station's speed dial numbers. The station speed dial codes are 00-49.Each station begins with 10 numbers (00-09) and can be assigned more in blocks of 10(up to a maximum of 50 numbers).Each speed dial number consists of a line access code and the telephone number to bedialled. The access code can be any line group, individual line, station group or individualextension. The speed dial number can be up to 32 characters long including #, FLASHand PAUSE.NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must be entered.When you are entering a speed dial number, there are some special keys that you willneed to use. These are the last 6 programmable keys of the righthand row known as A,B, C, D, E and F and are defined below.PROGRAM KEYSUP & DOWN Selects a station.KEYPAD Used to enter number.HOLD Press to clear entry.A Does not have a function.B Inserts a FLASH.C Inserts a PAUSE.D Changes the dialling type from pulse to tone.E Hides and displays digits.Open customer programming and follow the instructions below.OPERATION1. Press TRSF 105 [201] SPEED DIAL00 :2. Dial the station number (e.g., 205)OR press UP or DOWN to select the station and[205] SPEED DIAL00 :press the right soft key to move the cursorOR press the left soft key to go to step 43. If the selected station has no speed dial bins, thisdisplay will be shown and a new station may be[205] SPEED DIALSPDBLK NOT EXISTselected