Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 716 (Page 1 of 2)MMC: 716 UK LCR OPTIONDESCRIPTIONThis MMC provides UK LCR options. Before using this MMC, make sure you havesuccessfully run MMC 812 to set the country code.0 NETWORK CODE Provides secondary network access code when thecall is routed to the secondary network. 16 entriesmaximum (each 10 digits maximum in length).1 PIN CODE Assigns PIN code used when the call is routed tosecondary 131 MCL network.2 CCC OPTION Selects Call Cost Option and is related only to 131Mercury service.3 STATION PIN NO Assigns individual users to selected PIN codes in thesystem.NOTE: The second entry may be selected as a primary secondary network. Bydefault, this is 132 (MCL Digital Access). If dialled digits are not matched to theentry in the LCR DIGIT TABLE (MMC 710) and start with 0, the network code inthe second entry will be dialled out by the system prior to transmitting dialled digit.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryACTION DISPLAY1. Press TRSF 716Display shows NETWORK CODE1:2. Enter item number (e.g., 1)ORPress UP or DOWN key to make selection and pressRIGHT soft key.PIN CODE1: