Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 705 (Page 1 of 2)MMC: 705 ASSIGN SYSTEM SPEED DIALDESCRIPTION:Enables the assignment of system speed dialling numbers. There are 500 entriesavailable for programming (see MMC 606). Each speed dial number consists of atrunk or trunk group access code followed by a separator and up to 24 digits to bedialled. These dialled digits may consist of 0–9, Q and #. If the system recognises avalid trunk or trunk group access number, it will automatically insert the separator.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryB Used to insert a flash code "F"C Used to insert a pause code "P"D Used to insert a pulse/tone conversion code "C"E Used to mask/unmask following digits – shows as "["or "]"F Used to enter name for speed dial bin (see MMC 706)ACTION DISPLAY1. Press TRSF 705Display shows SYS SPEED DIAL500:2. Dial speed index desired (e.g., 505)ORPress UP or DOWN key to make selection andpress RIGHT soft key to move cursorSYS SPEED DIAL505:3. Enter access code (e.g., 9/701) plus the phonenumber up to 24 digits (digits will scroll under)and press RIGHT soft key to return to step 2SYS SPEED DIAL505:9–1212234564. Press F key to toggle to MMC 706 step 3 toenter name SYS SPEED NAME505:5. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: NoneRELATED ITEMS: MMC 606 Assign Speed BlockMMC 706 System Speed Dial By Name“A” button is button #19 on keyset“B” button is button #20 on keyset