Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 103 (Page 1 of 2)MMC: 103 SET ANSWER MODEDESCRIPTION:Allows the system administrator to change the answer mode of any keyset oradd–on module (AOM). Each keyset or AOM can have its answer mode set toone of the following options:0. RING: The keyset will ring in one of eight custom ring patterns. Calls areanswered by pressing the ANS/RLS key or by lifting the handset.1. AUTO: After giving a short attention tone, the keyset will automatically answercalls on the speakerphone. When a C.O. line is transferred to a keysetin Auto Answer, the screened portion of the call will be Auto Answer,but the keyset or AOM will ring when the transfer is complete if theuser has not pressed the ANS/RLS key or lifted the handset.2. VOICE: The keyset will not ring. After a short attention tone, callers can makean announcement but the ANS/RLS key or handset must be used toanswer calls.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 103Display shows[201] ANS MODERING MODE2. Dial keyset number (e.g., 205)OR[205] ANS MODERING MODEPress UP or DOWN to select keysetand press RIGHT soft key to move cursorORPress ANS/RLS to select All [ALL] ANS MODE?3. Dial 0, 1 or 2 to change answer mode(e.g. 2)[205] ANS MODEVOICE ANNOUNCEORPress UP or DOWN to select answermode and press RIGHT soft key to returnto step 2 above4. Press TRSF to store and exitORPress SPK to store and advance to nextMMC