Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 312 (Page 1 of 2)MMC: 312 ALLOW CLIPDESCRIPTION:Allows the system administrator or technician to either:– allow or prevent receipt of CLIP data from the networkOR– request or restrict sending of CLIP data to the network.Each station can have the following options:SEND: YES – request the network to send Caller ID when outgoing call is made.NO – request the network NOT to send Caller ID when outgoing call is made.RCV: YES – allow display of CLIP data at LCD 24B and LCD 12B keysets.NO – prevent display of CLIP data at LCD 24B and LCD 12B keysets.INFO: CLIP data to send to the network.0. C.O Tel.1. Ext Number2. C.O Tel+Ext Number3. DID NumberACTION DISPLAY1. Press TRSF 312Display shows [201] ALLOW CLIPRCV:YES SND:YES2. Dial station number (e.g., 205)ORPress UP or DOWN to select station and pressright soft key to move cursorORPress ANS/RLS to select all[205] ALLOW CLIPRCV:YES SND:YESOR[ALL] ALLOW CLIPRCV:YES SND:YES3. Dial 0 or 1 to select optionORPress UP or DOWN to select option and pressrightsoft key to move cursor to SND field[205] ALLOW CLIPRCV:YES SND:YESOR[ALL] ALLOW CLIPRCV:YES SND:YES4. Dial 0 or 1 to select option for SNDORPress UP or DOWN to select option and pressrightsoft key to move cursor to INFO field[205] ALLOW CLIPRCV:YES SND:YESOR[ALL] ALLOW CLIPRCV:YES SND:YES