Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 105 (Page 1 of 2)MMC: 105 STATION SPEED DIALDESCRIPTION:Allows the system administrator or technician to program the personal speed diallocations assigned to a station. This must be done for single line telephonesbecause these stations cannot access programming. Each station may have upto 50 locations or bins assigned to it in MMC 606 Assign Speed Block. The speeddial bins are numbered 00–49. Each speed dial number consists of a trunk ortrunk group access code followed by a separator and up to 24 digits to be dialled.These dialled digits may consist of 0–9, [ and #. If the system recognises a validtrunk or trunk group access number, it will automatically insert the separator.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryB Used to insert a flash code “F”C Used to insert a pause code “P”D Used to insert a pulse/tone conversion code “C”E Used to mask/unmask following digits (shows as “[” or “]”)F Used to enter name for speed dial bin (see MMC 106)ACTION DISPLAY1. Press TRSF 105Display shows[201] SPEED DIAL00 :2. Dial station number (e.g. 205)OR[205] SPEED DIAL00 :Press UP or DOWN to select station andpress RIGHT soft key to move cursorIf selected station has no speed dial bins,the display will be as shown and a new[205] SPEED DIALSPDBLK NOT EXISTstation may be selected3. Dial location number (e.g., 05)OR[205] SPEED DIAL05: _Press UP or DOWN to select location andpress RIGHT soft key to move cursor4. Enter trunk access code (e.g., 9) followedby the number to be dialled (e.g., 4264100)[205] SPEED DIAL05 : 9–4264100_ORPress the RIGHT soft key to return to step 2ORPress the LEFT soft key to return to step 3Press HOLD button to clear an entryIf an error is made, use DOWN arrow tostep back