Sanyo PLC-WTC500AL - 5000 Lumens Manual

Also see for PLC-WTC500AL - 5000 Lumens: Owner's manual Specifications Manual

Contents

Sanyo PLC-WTC500AL - 5000 Lumens Manual Manual pdf 15 page image

PLC-WTC500L Expand Serial Command Functional Specifications15/75CR_SHUTKEYPROT[CR] Get Key controller disability state of the shutterCR_SHUTH[CR] Get time setting to begin the shutter managementCR_HDMISETUP [CR] Get setting status of Image of “HDMI setup”CR_HDMISOUND [CR] Get setting status of Sound of “HDMI setup”CR_SECURITY [CR] Get setting status of SecurityCR_PJLOCKNOW [CR] Get setting status of current PJ LockCR_PJLOCKMENU [CR] Get PJ Lock setting status on the menuCR_KEYDIS [CR] Get RC/KEY prohibited statusCR_TESTPAT[CR] Get setting status of Test patternCR_FILH[CR] Get Filter used timeCR_FILCOND[CR] Get status of filter clogCR_FILREPL[CR] Get status of Filter cleaning / replacement timeCR_FILTIMER[CR] Get time to display Filter cleaning / replacement warning onscreenCR_FILREMAIN[CR] Get remaining number of usable Filter scroll6.9 Other Status Read Command TableStatus Read command ItemCR_STATUS [CR] Get operating status of ProjectorCR_SIGNAL [CR] Get status of signal existenceCR_VMUTE [CR] Get setting status of No showCR_FREEZE [CR] Get setting status of FreezeCR_TEMPFAIL [CR] Get temperature when sensors approach abnormaltemperatureCR_TEMP [CR] Get current temperatureCR_SHUTCOND [CR] Get setting status of ShutterCR_SERIALNO [CR] Get value of Serial number7 Error Code TableError Code Contents?-When the received data cannot be decoded-Parameter designation error (wrong digit number,including invalid value, etc.)000 Normal reception (This is “Not” error)102 Directly specified value or values are out of range.(Not reflected)103 Command mismatched to Hardware (the commandis for Optional function which is not implemented)201 Incremented or decremented value or values arebeyond upper or lower limits.301 Not executable due to screen capturing in process.Prompting reissue of the command after a while.402 Not executable due to PIN code in operation.Prompting reissue of the command after a while.101 Error not applicable to above errors