Sanyo PLC-WTC500AL - 5000 Lumens Manual

Also see for PLC-WTC500AL - 5000 Lumens: Owner's manual Specifications Manual

Contents

Sanyo PLC-WTC500AL - 5000 Lumens Manual Manual pdf 36 page image

PLC-WTC500L Expand Serial Command Functional Specifications36/75The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.4 CF_PIPSIZE CommandCommand “CF_PIPSIZE_%1” [CR]%1“SMALL” ---------------------- Select Small“MIDDLE” -------------------- Select Middle“LARGE” ---------------------- Select Large“UP” ------Select functions to choose forward (Middle→Large→Small→Middle→ --)“DN” ----Select functions to choose backward(Small→Large→Middle→Small→ --)DetailsSet screen size of Picture in Picture.(Available only in the normal Power ON status)*When P in P is not selected, error code “101” is returned.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.5 CF_PIPPOSITION CommandCommand “CF_PIPPOSITION_%1” [CR]%1“BTMRIGHT” --------------- Select Bottom Right“BTMLEFT” ----------------- Select Bottom Left“TOPRIGHT” --------------- Select Top Right“TOPLEFT” ----------------- Select Top Left“UP” ---------------------------Select functions to choose forward(Bottom Right→Top Right→Top Left→Bottom Left→ --)“DN” –-------------------------Select functions to choose backward(Bottom Left →Top Left→Top Right→Bottom Right→ --)DetailsSet position of Picture in Picture.(Available only in the normal Power ON status)*When P in P is not selected, error code “101” is returned.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.6 CF_BACKGND CommandCommand “CF_BACKGND_%1” [CR]%1“BLUE” -------------------- Select Blue Back“USER” ------------------- Select User“BLACK” ------------------ Select Black Back“UP” ---------- Switch forward (Blue Back→User→Black Back→Blue Back)“DN” --------- Switch backward (Blue Back→Black Back→User→Blue Back)DetailsSet Screen status for no signal.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and the setting remainseven after the power is turned to ALL OFF status.*When 1=”USER” is received, error code “101” is returned, in the case ofCapture non-practice.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]