Sanyo PLC-WTC500AL - 5000 Lumens Manual

Also see for PLC-WTC500AL - 5000 Lumens: Owner's manual Specifications Manual

Contents

Sanyo PLC-WTC500AL - 5000 Lumens Manual Manual pdf 50 page image

PLC-WTC500L Expand Serial Command Functional Specifications50/759.5.4 CR_H-POS CommandCommand “CR_H-POS” [CR]Details Get value of Horizontal PositionResponseAcceptable “000_%1” [CR]%1 “0000 – nnnn”(nnnn = Total Dots – Display area H)Unacceptable“Error Code” [CR] ------ When command is not available in thegiven condition (such as being selected input“?” [CR] ------------------- When unknown command is received9.5.5 CR_V-POS CommandCommand “CR_V-POS” [CR]Details Get value of Vertical PositionResponseAcceptable “000_%1” [CR]%1 “0000 – nnnn”(nnnn = Total Line – Display area V)Unacceptable“Error Code” [CR] ------ When command is not available in thegiven condition (such as being selected input“?” [CR] --------------------- When unknown command is received9.5.6 CR_DDOTS CommandCommand “CR_DDOTS” [CR]Details Get value of Display DotsResponseAcceptable “000_%1” [CR]%1 “0100 – nnnn”(nnnn = Total Dots – Position H)Unacceptable“Error Code” [CR] ---- When command is not available in thegiven condition (such as being selected input“?” [CR] -------------------- When unknown command is received9.5.7 CR_DLINE CommandCommand “CR_DLINE” [CR]Details Get value of Display LineResponseAcceptable “000_%1” [CR]%1 “0100 – nnnn”(nnnn = Total Line – Position V)Unacceptable“Error Code” [CR] ---- When command is not available in thegiven condition (such as being selected input)“?” [CR] -------------------- When unknown command is received