PLC-WTC500L Expand Serial Command Functional Specifications44/758.11 Other Commands8.11.1 CF_KEYEMU CommandCommand “CF_KEYEMU_%1” [CR]%1“RIGHT” ---------------- Move Pointer rightward in On-Screen Display Menu“LEFT” ------------------ Move Pointer leftward in On-Screen Display Menu“UP” ---------------------- Move Pointer to upward On-Screen Display Menu“DN” --------------------- Move Pointer to downward in On-Screen Display Menu“SELECT” -------------- The same operation as “SELECT” button of RC“AUTOPC” ------------- Execute Auto PC Adj. operationDetailsThe same operation as Control Key.Auto PC Adj. operation is not stopped before getting back a return value duringthis Auto PC Adj. operation even if this command is received again.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.11.2 CF_MENU CommandCommand “CF_MENU_%1” [CR]%1 “ON” --------------------- Display On-Screen Display Menu“OFF” -------------------- Hide On-Screen Display MenuDetails Set On-Screen Display mode. (Available only in the normal Power ON status)Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.11.3 CF_POWER CommandCommand “CF_POWER_%1” [CR]%1“ON” ----------------------------- Power ON“OFF” --------------------------- Power OFF* Issuing another command during countdown process forced countdownoperation to be terminated.* Error Code is returned in some projector statuses, which indicates thecommand is impossible to be executed. (See [8.3] for details)* Returning the response “000” [CR] (acceptable) does not always mean that thestatus has already changed to Power ON.Example: When the temperature approaches abnormal status after returning“000” [CR] to the command CF_POWER ON.Therefore, to get the projector status requires using Status Read command.Details Set Power to ON/OFFResponse Acceptable “000” [CR]Unacceptable “Error Code” [CR]