Sanyo PLC-WTC500AL - 5000 Lumens Manual

Also see for PLC-WTC500AL - 5000 Lumens: Owner's manual Specifications Manual

Contents

Sanyo PLC-WTC500AL - 5000 Lumens Manual Manual pdf 52 page image

PLC-WTC500L Expand Serial Command Functional Specifications52/759.5.10 CR_SETPCADJ CommandCommand “CR_SETPCADJ” [CR]Details Get PC signal for current systemResponseAcceptable “000_%1” [CR]%1When input signal is PC Analog;“VGA1” ------------------------ Indicates VGA1 is selected“VGA2” ------------------------ Indicates VGA2 is selected::“XGA1” ------------------------ Indicates XGA1 is selected::“WXGA3” --------------------- Indicates WXGA3 is selected“1080I” ------------------------ Indicates 1080i is selected“1035I” ------------------------ Indicates 10350i is selected“720p” ------------------------- Indicates 720p is selected“575p” ------------------------- Indicates 575p is selected“480p” ------------------------- Indicates 480p is selected“575I” -------------------------- Indicates 575i is selected“480I” -------------------------- Indicates 480i is selected“MODE1”---------------------- Indicates Mode1 is selected:“MODE10” ------------------- Indicates Mode10 is selected“EXT11” ---------------------- EXT11 is selected:“EXT60” ---------------------- EXT60 is selected* Error Code “101” [CR] is returned for no signal.* When input signal is not PC Analog, error code “101” isreturned.Unacceptable “Error code” [CR]9.6 Video Status Read Command9.6.1 CR_SERSYS CommandCommand “CR_SERSYS” [CR]DetailsGet selected current signal.Auto detected signal is returned in Auto modeOnly available when Input is Y,Pb/Cb,Pr/Cr, S-Video or Video. (This is not the casefor PC-Analog/PC-Digital/AV HDCP signals)ResponseAcceptable “000_%1” [CR]%1“1080I60” -------------- 1080i 60Hz“1080I50” -------------- 1080i 50Hz“1035I”. ---------------- 1035i“720P60” -------------- 720p60Hz“720P50” -------------- 720p50Hz“575P” ------------------ 575p“480P” ------------------ 480p“575I” ------------- 575i (includes Composite signal such as PAL)“480I” ------------ 480i (includes Composite signal such as NTSC)“NO_SIGNAL” --------------- No signalUnacceptable“101” [CR] --- When input signal is PC-Analog, PC-Digital or PCsignals in AV HDCP“?” [CR] -------------------- When unknown command is received