Sanyo PLC-WTC500AL - 5000 Lumens Manual

Also see for PLC-WTC500AL - 5000 Lumens: Owner's manual Specifications Manual

Contents

Sanyo PLC-WTC500AL - 5000 Lumens Manual Manual pdf 35 page image

PLC-WTC500L Expand Serial Command Functional Specifications35/758.10 Setting Command8.10.1 CF_LANG CommandCommand “CF_LANG_%1” [CR]%1“ENG” --------------------------- Select ENGLISH“DEU” --------------------------- Select German“FRA” --------------------------- Select French“ITA” ----------------------------- Select Italian“ESP” ---------------------------- Select Spanish“POR” --------------------------- Select Portuguese“NED” --------------------------- Select Dutch“SVE” --------------------------- Select Swedish“JPN” --------------------------- Select Japanese“CHI” ---------------------------- Select Chinese“KOR” --------------------------- Select Korean“RUS” --------------------------- Select RussianDetailsSet language for OSD (Available only in the normal Power ON status)The language set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.2 CF_LOGO CommandCommand “CF_LOGO_%1_%2” [CR]%1 “0000 – 9999” ------------- Directly set Logo PIN code%2“OFF” ---------------------------Cancel Logo display“DFLT” ------------------------- Select Logo of Factory Default“USER” ------------------------ Select User“UP” -----------Select functions to choose forward (OFF→DFLT→USER→OFF→ --)“DN” ---------Select functions to choose backward(OFF→USER→DFLT→OFF→ --)DetailsSet Logo mode.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.Set Logo PIN code in %1.When Logo Lock is enabled:PIN code is matched ------------------------- Command is valid (Acceptable)PIN code is mismatched-------------------- Command is invalid (Error code “102”)PIN code is beyond %1 available range ------------ Command is invalid (Errorcode”?”)When Logo Lock is disabled:PIN code is within %1 available range ------- Command is valid (Acceptable)PIN code is out of %1 available range ------- Command is invalid (Error code “?”)Note: When Logo Lock is enabled, matching Logo PIN code switches Logo butLogo Lock is not cancelled (Lock status is kept).*When 2=”USER” is received, error code “101” is returned, in the case ofCapture non-practice.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.3 CF_PIP CommandCommand “CF_PIP_%1” [CR]%1“OFF” ---------------------------Select Off“PINP” ------------------------- Select P in P mode“PBYP” ------------------------ Select P by P mode“UP” ----------Select functions to choose forward (OFF→P in P→P by P→OFF→ --)“DN” -----Select functions to choose backward(P by P→P in P→OFF→P by P→ --)Details Set status of Picture in Picture.(Available only in the normal Power ON status)