Sanyo PLC-WTC500AL - 5000 Lumens Manual

Also see for PLC-WTC500AL - 5000 Lumens: Owner's manual Specifications Manual

Contents

Sanyo PLC-WTC500AL - 5000 Lumens Manual Manual pdf 34 page image

PLC-WTC500L Expand Serial Command Functional Specifications34/758.9 Sound Command8.9.1 CF_VOLUME CommandCommand “CF_VOLUME_%1”[CR]%1“000-063” --------------------------- Directly select Volume setting value“UP” --------------------------------- Current Volume setting value +1“DN” --------------------------------- Current Volume setting value -1DetailsControl level of volume. (Available only in the normal Power ON status)Set Volume Up/Down the same way as remote control and also directly selectVolume setting value. When setting Volume value, the Sound Mute ON status iscanceled just like RC operation. The value set by this command is stored inProjector.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.9.2 CF_MUTE CommandCommand “CF_MUTE_%1”[CR]%1 “ON” ----------------------------- Set Sound Mute ON“OFF” --------------------------- Set Sound Mute OFFDetails Control Sound Mute ON/OFF (Available only in the normal Power ON status)Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]