1 - 116Chapter 3 Removal and Replacement Procedures (RRPs)RRP6.13 LEVER LINK (PL 6.1.29), LINK GEAR 3(PL 6.1.30)Removal1) Remove the COVER REAR 500 (PL 7.1) (RRP7.9).2) Remove the COVER REAR (PL 1.1) (RRP1.1).3) Remove the FUSER ASSEMBLY (PL 6.1) (RRP6.8).4) Remove the COVER LEFT (PL 1.1) (RRP1.3).5) Remove the COVER RIGHT (PL 1.1) (RRP1.2).6) Remove the COVER EXIT 500 (PL 1.1) (RRP7.1).7) Remove the 500 EXIT ASSEMBLY (PL 7.1) (RRP7.2).8) Remove the COVER TOP (PL 1.1) (RRP1.4).9) Remove the COVER FRONT (PL 1.1) (RRP1.5).10) Remove the BTR ASSEMBLY (PL 6.1) (RRP6.9).11) Remove the DUCT FRONT (PL 6.1) (RRP6.2).12) Remove the ROS ASSEMBLY (PL 6.1) (RRP6.1).Be careful not to drop or strike the ROS Assembly with any tools or other objects.13) Remove the SHIELD PLATE ROS (PL 6.1) (RRP6.3).14) Remove the GUIDE TRAY LEFT (PL 5.1) (RRP5.8).15) Remove the MOTOR COVER (PL 8.1) (RRP8.1).16) Remove the SHIELD PLATE LVPS (PL 9.1) (RRP8.1).17) Remove the GUIDE CRU LEFT (PL 6.1) (RRP6.4).18) Remove the COVER GUIDE CRU (PL 6.1) and HARNESS ASSEMBLY FUSER (PL 6.1) from theGUIDE CRU LEFT (RRP6.7).19) Remove the LEVER LINK and LINK GEAR 3 (Figure 1).Figure 1. Link Lever & Link Gear
